RHCLP 7.5ton Commercial Air Handler HP Only 230V 3phase
Price only visible to logged in users
Product number:76682
Manufacturer number:RHCLP2090CBR
Other models available
Additional Info
- Additional Info
- Belt VFD Low Static Drive
Air Volume/Air Flow
Application
Connections
Cooling Capacity
Description
Electrical
Energy Efficiency/Performance
Filters
General Information
Pressure
Rated Capacity
Standards
Product description
The pre-painted, sheet metal cabinet uses 18 ga material for structural components with an underlying coat of G60 electro deposition powder-coating that is tested to withstand a rigorous 500 hr salt spray test, per ASTM B117
Inherently protected motors are mounted inside of insulated cabinet to reduce motor noise
A choice of motor horsepower's and drive combinations are available to allow you to meet specified CFM at various static pressures up to 2 in external static pressure
Allows for horizontal installation in most standard drop ceiling applications and the movement of units through most standard doorways for addition or replacement work
1 in throwaway filters are standard, but filter racks are designed to accept either 1 in or 2 in filters
Two circuit, interlaced row split coils are constructed with copper tubes and aluminum fins mechanically bonded to the tubes for maximum heat transfer capabilities
All coil assemblies are leak tested up to 450 psig internal pressure prior to installation into units
Field piping connections are made through a fixed post between two side access panels on either side of the unit
Allows flexibility to meet most field conditions as well as full accessibility after the installation is complete, units may be used with two straight cool condensing units or single circuit manifolded in the field using the copper fittings shipped with each unit
Provides two-stage airflow for improved part load efficiency
The galvanized steel drain pan is designed to trap condensate in either vertical or horizontal installations
Condensate drain connections are located on both sides of the unit allowing complete flexibility to meet most field conditions
Two removable panels on top and each side of the unit are easily removed for access to motors, blowers, sheaves and filters
All Models are designed for either application and can be installed in either position as supplied from the factory
It has two TX valves with internal check valves that allow reverse flow to occur, providing superior control during heating and cooling cycles
The RHCLP air handler has been rated and certified to operate with matching size RPCL heat pumps
Inherently protected motors are mounted inside of insulated cabinet to reduce motor noise
A choice of motor horsepower's and drive combinations are available to allow you to meet specified CFM at various static pressures up to 2 in external static pressure
Allows for horizontal installation in most standard drop ceiling applications and the movement of units through most standard doorways for addition or replacement work
1 in throwaway filters are standard, but filter racks are designed to accept either 1 in or 2 in filters
Two circuit, interlaced row split coils are constructed with copper tubes and aluminum fins mechanically bonded to the tubes for maximum heat transfer capabilities
All coil assemblies are leak tested up to 450 psig internal pressure prior to installation into units
Field piping connections are made through a fixed post between two side access panels on either side of the unit
Allows flexibility to meet most field conditions as well as full accessibility after the installation is complete, units may be used with two straight cool condensing units or single circuit manifolded in the field using the copper fittings shipped with each unit
Provides two-stage airflow for improved part load efficiency
The galvanized steel drain pan is designed to trap condensate in either vertical or horizontal installations
Condensate drain connections are located on both sides of the unit allowing complete flexibility to meet most field conditions
Two removable panels on top and each side of the unit are easily removed for access to motors, blowers, sheaves and filters
All Models are designed for either application and can be installed in either position as supplied from the factory
It has two TX valves with internal check valves that allow reverse flow to occur, providing superior control during heating and cooling cycles
The RHCLP air handler has been rated and certified to operate with matching size RPCL heat pumps
| File name | Document type | Extension | File size | Updated at | |
|---|---|---|---|---|---|
| rheem-rhclp2090cbr-specification-sheet-ast-unilog-700264.pdf | 0.68 MB | 03.06.2026 | 07:17 | |||
| rheem-rhclp2090cbr-warranty-ast-unilog-110069.pdf | 0.22 MB | 03.06.2026 | 07:17 |
Additional Info
- Additional Info
- Belt VFD Low Static Drive
Air Volume/Air Flow
Application
Connections
Cooling Capacity
Description
Electrical
Energy Efficiency/Performance
Filters
General Information
Pressure
Rated Capacity
Standards
Product description
The pre-painted, sheet metal cabinet uses 18 ga material for structural components with an underlying coat of G60 electro deposition powder-coating that is tested to withstand a rigorous 500 hr salt spray test, per ASTM B117
Inherently protected motors are mounted inside of insulated cabinet to reduce motor noise
A choice of motor horsepower's and drive combinations are available to allow you to meet specified CFM at various static pressures up to 2 in external static pressure
Allows for horizontal installation in most standard drop ceiling applications and the movement of units through most standard doorways for addition or replacement work
1 in throwaway filters are standard, but filter racks are designed to accept either 1 in or 2 in filters
Two circuit, interlaced row split coils are constructed with copper tubes and aluminum fins mechanically bonded to the tubes for maximum heat transfer capabilities
All coil assemblies are leak tested up to 450 psig internal pressure prior to installation into units
Field piping connections are made through a fixed post between two side access panels on either side of the unit
Allows flexibility to meet most field conditions as well as full accessibility after the installation is complete, units may be used with two straight cool condensing units or single circuit manifolded in the field using the copper fittings shipped with each unit
Provides two-stage airflow for improved part load efficiency
The galvanized steel drain pan is designed to trap condensate in either vertical or horizontal installations
Condensate drain connections are located on both sides of the unit allowing complete flexibility to meet most field conditions
Two removable panels on top and each side of the unit are easily removed for access to motors, blowers, sheaves and filters
All Models are designed for either application and can be installed in either position as supplied from the factory
It has two TX valves with internal check valves that allow reverse flow to occur, providing superior control during heating and cooling cycles
The RHCLP air handler has been rated and certified to operate with matching size RPCL heat pumps
Inherently protected motors are mounted inside of insulated cabinet to reduce motor noise
A choice of motor horsepower's and drive combinations are available to allow you to meet specified CFM at various static pressures up to 2 in external static pressure
Allows for horizontal installation in most standard drop ceiling applications and the movement of units through most standard doorways for addition or replacement work
1 in throwaway filters are standard, but filter racks are designed to accept either 1 in or 2 in filters
Two circuit, interlaced row split coils are constructed with copper tubes and aluminum fins mechanically bonded to the tubes for maximum heat transfer capabilities
All coil assemblies are leak tested up to 450 psig internal pressure prior to installation into units
Field piping connections are made through a fixed post between two side access panels on either side of the unit
Allows flexibility to meet most field conditions as well as full accessibility after the installation is complete, units may be used with two straight cool condensing units or single circuit manifolded in the field using the copper fittings shipped with each unit
Provides two-stage airflow for improved part load efficiency
The galvanized steel drain pan is designed to trap condensate in either vertical or horizontal installations
Condensate drain connections are located on both sides of the unit allowing complete flexibility to meet most field conditions
Two removable panels on top and each side of the unit are easily removed for access to motors, blowers, sheaves and filters
All Models are designed for either application and can be installed in either position as supplied from the factory
It has two TX valves with internal check valves that allow reverse flow to occur, providing superior control during heating and cooling cycles
The RHCLP air handler has been rated and certified to operate with matching size RPCL heat pumps
| File name | Document type | Extension | File size | Updated at | |
|---|---|---|---|---|---|
| rheem-rhclp2090cbr-specification-sheet-ast-unilog-700264.pdf | 0.68 MB | 03.06.2026 | 07:17 | |||
| rheem-rhclp2090cbr-warranty-ast-unilog-110069.pdf | 0.22 MB | 03.06.2026 | 07:17 |